12 empty, compatible, refillable cartridges each with 130ml capacity For HP Designjet Z3100 and Z3200 with Auto reset chip Unlimited continuous chips with long time testing and works stable as it is designed by original chips. Product Condition new, ink not included Product Description
for HP Designjet Z3100 and Z3200 printers 12 empty, compatible, refillable cartridges each with 130ml capacity for HP70 cartridges: matte black
Caution:Before using our chip,If your printer is a new one(never opened or used),it needs to initialize printer by your original ink cartridges.
1.The chip works stable as it is designed by original chip,this refiillable ink cartridge was installed the chip;
2.You can follow the choice"ok" after you install the cartridges,after installing,the printer will show the ink level fully,and it will decrease when ink uses,if the the ink level shows empty,it will show "grey" or " " or "!", but it can be printed continuously.
Package includes: 1Set refillable ink catridge with auto reset chip;
1. Prepare: Unplug the refill hole, use the syringe to draw about 4 5 ml of ink for the black cartridge and 20ml of ink for the color cartridges
2. Insert the syringe into the ink refilling hole. Push the plunger slowly to fill the cartridge with ink.
3. Plug the refilling hole. Once again, you must take the air plug out of air hole before you put the refillable cartridge in the printer. Otherwise, you will not be able to print anything out. If you try printing something, the print head can dry out or burn out.
4. If the print quality is not very good after the refill, just do one time head cleaning, and let the printer sit there for a few hours. It should be good.
- Brand Name: CaoDuRen
- Type: Other
- Unit Type: piece
- Package Weight: 0.5kg (1.10lb.)
- Package Size: 13cm x 7cm x 8cm (5.12in x 2.76in x 3.15in)