Product Description

Main Features: n Adjustable 4 modes:25mW/100mW/200mW/OFF n 700VTL camera, 120degree field of view n Betaflight/Cleanflight OSD setting of power,bands,channels and PitMode n Clean powerup and channel switching without interference to others n PWM channel changes and PitMode setting n Support external OSD and NTSC/PAL switch n Miniature and light weight design Specifications Model: EWRF 7082VTA1S Frequency: 5.8G 48CH Transmitting Power:25mW/100mW/200mW/OFF(Pitmode) Power supply:DC 6-25V(1S) Supply current:95mA(25mW)/130mA(100mW)/175mA(200mW) Resolution:PAL 720x540/NTSC 640x480 Angle of view: H 120 degree, V 110 degree Antenna: Exclusive Dipole Whip Weight:4 g Dimension:28*18.3*5.5 mm User Guide: 1. Setting After power on, the digital display shows the following three parameters in turn: channel, band and power.Press and hold the button until the red dot appears on the right bottom of the digital display, which can be entered into the parameters setting. When the digital display shows the Arabic numerals for the channel (1-8),press the button can select the channels. Press and hold the button again,the digital display will shows the alphabet for band(A-b-c-d-E-F), press the button can select the bands. Press and hold the button again,the digital display will shows the indication for power(H:200mW,U:100mWmL:25mW,OFF), press the button can select the power. Finally, press and hold the button,the red dot on the right bottom of the digital display will disappear.VTX is back to normal working state and the channel,band,power will display in turn on the digital display. 2. PWM/OSD setting When PWM port is connected with a RC receiver, it can been used to change AV channels 1-8 and to shut transmitting by a RC( PITMODE in effect). Make sure that there is a PWM signal from receiver within 3 seconds after powering up ,otherwise the transmitter is back to button-press setting mode . When in the setting mode of PWM, the red dot on the digital display will glow. For Betaflight/Cleanflight OSD setting of power,bands,channels and Pitmode ,please referring to EWRF 5.8G AV TX OSD Setting for details. Frequency(Mhz) Note: 1.Make sure that there is enough space for airflow when installing the module on the drone in case the overheating protection starts to reduce the power even to shut down at the worst. 2. Please install the antenna before powering up for a longer use life. 3. .The maximum current of output DC 5V is 300mA.
To Dear Customer,
About Payment will check the payment after paying in 24 hours,unsafe order will be canceled automatically.
Please check your information carefully, such as address, phone number, and post code. Make sure they are all right,otherwise you can not receive the goods you ordered. If you want to change them, please leave a message to us!
About Shipping
We will arrange the shipment as soon as possible after paying.But the delivery time depends on the logistics company.
If you need the item faster .please choose EMS or DHL services , the item will arrive into you about 5-20days, the extra freight will be paid by the buyer.
The order may cause a extended delay on the shipment, because of the customs checking. Please wait.
We will send your order within 5 days. If the goods are out off stock,we will inform you in advance.
Note:Please check the package before signing duing to the Post Office is very rude during the delivery. You have the right to claim compensation if the package is damaged during delivery,and we do not assume full responsibility.
About Refund
All our goods will be checked before shipment, make sure that it does not have any problem or defect.
If you are not satisfied with the purchase, you can exchange the items in one week and you must contact us within 24 hours of the receipt of your purchase.
The shipping and handling charge is not refundable and customer should be responsible for all the charges of returning and reshipping.
Before you return, please ensure that the original packaging is intact,and the product does not affect the secondary sales.
All return items must be in its original conditions, including box and accessories. Manmade defects are not guaranteed, such as broken, scratched, and so on.
Please make sure that the goods you want to return is ours! Otherwise, we will refuse to refund even we have received the goods you returned.
For any items, please send by EMS or your local post when send back.
About Feedback
Early confirmation will be appreciated after receiving.
If you are satisfied with our goods and service,please give a 5 star of praise,which is very important to us. Thank you for your kind help!

  • Use: Vehicles & Remote Control Toys
  • Material: Composite Material
  • RC Parts & Accs: Transmitters
  • Upgrade Parts/Accessories: Adapter
  • Four-wheel Drive Attributes: Assemblage
  • Tool Supplies: Assembled class
  • Brand Name: ZMR
  • For Vehicle Type: Helicopters
  • Technical parameters: Value 3
  • Model Number: EWRF E7082TM Receiver Transmitter
  • Remote Control Peripherals/Devices: EWRF E7082TM Receiver Transmitter

  • Unit Type: piece
  • Package Weight: 0.08kg (0.18lb.)
  • Package Size: 10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)

SKU: a674

Related products

Free shipping

Worldwide shipping

Support 24/7

Top Service


Return Exchange